|
Ceramic Fuel Cell Published Technical Papers
Below, we list a sample of the technical papers related to ceramic components used in advanced fuel cell systems
br>
Related Technical Papers:
- Sanders, Michael D., and Ryan P. O'Hayre, comps. Modeling of Material Parameters for Increased Steam-Permeation in
Yttrium-Doped Barium Cerate Ceramic Membranes. Colorado School of Mines. Denver: ASME, 2008. 1-7.
- Menzer, Sophie, Grover Coors, Dustin Beeaff, and Dan Storjohann, comps. Development of Low-Cost Anode Material for Solid Oxide Fuel Cells.
Engineering Division, CoorsTek Inc.; Engineering Division,
Colorado School of Mines. Denver: ASME, 2008. 1-6.
- Persky, J, S Menzer, D Storjohann, D Beeaff, and G Coors, comps. Spray Coating of Electrolyte Films for Solid Oxide Fuel Cells.
CoorsTek; Division of Engineering, Colorado School of Mines. Denver: ASME, 2008. 1-7.
- Storjohann, Daniel, James Daggett, Neal Sullivan, Sophie Menzer, and Dustin Beeaff, comps. Comparative Study of SOFC's Fabricated with Conventional and Reaction-Sintered 8YSZ Powders.
Fuel Cell Division, CoorsTek Inc.; Engineering Division, Colorado School of Mines. Denver: ASME, 2008. 1-6.
- Rod W. Sidwell and W. Grover Coors, "Thermodynamic limits of electrical efficiency in hydrocarbon fueled SOFC using internal reforming," Proceeding of the
Ninth International Symposium on Solid Oxide Fuel Cells
(SOFC-IX), May 15-20, 2005, Quebec City, Canada, pp.640-648
- W. Grover Coors, "Protonic ceramic fuel cells for high-efficiency operation
with methane,"
Journal of Power Sources, 118 150-156 (2003)
- W. Grover Coors, "Development of a protonic ceramic fuel cell at Protonetics," Proceedings of the
5th European Solid Oxide Fuel Cell Forum, Joep Huijsmans, Editor, Vol.2, 602-607 (2002)
- W.G. Coors and R.C. Swartzlander, "Conductivity measurements in BCY10 by
Impedance Spectroscopy,"
26th Riso International Symposium on Materials Science: Solid State Electrochemistry, September 4-8, 2005 (Accepted)
- R.J. Kee, H. Zhu, D.G. Goodwin, R.W. Sidwell and W.G. Coors, "Computational predictions of cell efficiency and fuel utilization as a function of fuel processing and cell voltage," Proceeding of the
Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), May 15-20, 2005, Quebec City, Canada, pp.649-658
- T. Schober, W. Grover Coors, "Entry and exit of water vapor in bulk ceramic
proton conductors,"
Solid State Ionics, 176, 357-362 (2005)
- W. Grover Coors, "Ceramic fuel cell technology - State of the technology," Governor's Technology Summit, State of Colorado, June 3, 2004
- W. Grover Coors, Rod Sidwell and Frank Anderson, "Characterization of electrical efficiency in protonic ceramic fuel cells," Proceedings of the
6th European Solid Oxide Fuel Cell Forum, Mogens Mogensen, Editor, Vol.1, 117-124 (2004)
- H.J. Kleebe, D. Zhong, E.D. Steffee and W.G. Coors, "Nonoscale
microstructure degradation of Y-BaCeO3 under service conditions,"
Euro Ceramics VIII, Key Engineering Materials 264-268 1141-1146 (2004)
- W.G. Coors and D. Zhong, "Differential resistance analysis of protonic
ceramic fuel cells for measuring bulk conductivity,"
Solid State Ionics, 162-163 283-290 (2003)
- W.G. Coors and D.W. Readey, "Proton conductivity measurements in yttrium
barium cerate by impedance spectroscopy,"
Journal
of American Ceramic Society, 85[11] 2637-2640 (2002)
- W. Grover Coors, "Electrode/electrolyte interface characterization in yttrium-doped BaCeO3 by impedance spectroscopy," Ph.D. Thesis, Denis W. Ready, Advisor, Colorado School of Mines, March 1, 2001
Contact Information:
Fuel Cell Component Specialists
+1.888.432.3557 Toll-Free (1.888.4.FCELLS)
+1.303.277.4983 Tel
+1.303.277.4058 Fax
|
|
