Hot Pressed Silicon Carbide
Composition
SiC
hot pressed silicon carbide overview
Hot pressing, also called pressure assisted densification, a ceramic significantly decreases the defects in the grain structure. This gives hot pressed silicon carbide an extremely hard surface and high-strength which is utilized in ballistic armor.
Example Applications
- Ballistic armor
- Etch rings
CoorsTek Formulations
Contact a CoorsTek expert to discuss custom solutions manufactured from Hot Pressed Silicon Carbide for your application.
| Property | Units | Value |
|---|---|---|
Flexural Strength, MOR (20 °C) |
MPa |
570 - 700 |
Fracture Toughness, KIc |
MPa m1/2 |
4.0 - 5.0 |
Thermal Conductivity (20 °C) |
W/m K |
95 - 130 |
Coefficient of Thermal Expansion |
1 x 10-6/°C |
4.5 |
Maximum Use Temperature |
°C |
- |
Dielectric Strength (6.35mm) |
ac-kV/mm |
- |
Dielectric Loss (tan δ) |
1MHz, 25 °C |
- |
Volume Resistivity (25°C) |
Ω-cm |
104 |
The information provided on this chart is for general material property reference only. The customer should recognize that exact properties of materials may vary according to product configuration but close control of values of most properties can be maintained, if specified. Nothing herein is provided, or is to be construed, as absolute engineering data or constituting a warranty or representation. Contact CoorsTek for cost-effective design, development and manufacturing assistance. CoorsTek has 300+ variations including various forming and firing processes, not all variants are represented in the present website.
CONNECT WITH COORSTEK
- +1 303 271 7100
-
+1 855 929 7100
(toll free in North America)